What precautions should be taken during the lighting process of the cooling tower?
Counts：8832023-07-25 15:41:33 Source: 河北中信防腐工程有限公司
What precautions should be taken during the lighting process of the cooling tower?
We know that the cooling tower is very large in our image, and there are certain difficulties in both initial construction and later maintenance. Regardless of the construction aspect, the same applies to the lighting we are going to talk about today. Firstly, the lighting of the cooling tower is a high-altitude operation, as its lower height may even exceed 50 meters or even be used in different fields. In some places, it may even exceed one or two hundred meters. In such high-altitude situations, we must first pay attention to the safety measures during the operation. On the one hand, it is whether the safety measures taken by the operators during the operation are in place and whether the safety tools are qualified, On the other hand, it is whether there are any personnel staying or operating on the ground, as warning signs are placed below to prevent anyone from entering.
In addition, fire prevention measures should be taken, as the overall temperature of the cold zone tower is relatively high. On the one hand, it is necessary to ensure personnel safety, and on the other hand, the placement of materials should also be inspected to prevent the occurrence of a fire.
Furthermore, in the process of beautifying the cooling tower, it is important to pay attention to our quality during painting or operation. The main purpose of lighting is to beautify, which can integrate with the surrounding environment or drive it forward. So whether it's anti-corrosion treatment or painting process, it's important to do a good job in aesthetics, especially in the early stages of operation. The tower body is cleaned and the beautification process is mainly completed through paint painting. When there is a large amount of mold and dirt on the tower body, it is necessary to clean the surface in a timely manner without defects such as oil, dust, bubbles, or peeling, to ensure that the entire surface of the tower body is flat and tidy.
Copyright: Hebei Zhongxin Anticorrosion Engineering Co., Ltd
Top
WeChat QR code 
中文版